The first set of files will be everything you need to build the Antenna Fairing as shown below. It was a challenging place to start. It's an odd part that most people don't get to see as the flown capsules lost theirs during descent. The first release will not include the internal wiring but it will be added later. I would really like some feedback. If  I don't get any, I may not post the instructions for the remainder of the project.

Some of the files may be large so be patient. All the files are listed on the first page of the instructions. These files should be dated 10/31/06.

 Instruction.pdf                   Instruction_last_page_11-01-06

Card_Fixture1.pdf

Card_Antenna1.pdf        Card_Antenna2.pdf         Card_Antenna3.pdf       Card_Antenna4.pdf

Card_Structure1.pdf      Card_Structure2.pdf       Card_Structure3.pdf       Card_Structure4.pdf

Card_Surface1.pdf        Card_Surface2.pdf          Card_Surface3.pdf

This is a simple spreadsheet that tracks all the parts for the antenna fairing on the full size replica. Most of these parts are modeled in the paper model.

                                  (Out for editing.....)

A few files were updated to make printing easier. Configuring your PDF and printer settings should let you print them all out. Let me know if you have problems. If you already printed them successfully, ignore this.

Last updated 12/20/2008                                © 2006 SpaceCraftReplicas.com